BTVDZ - D-2510 BLACK DEVELOPER
- MSDS: BTVDZ
- Manufacturer: TOSHIBA CORP YANAGICHO WORKS
- Product Name: D-2510 BLACK DEVELOPER
- National Stock Number: 6850-00F036076
Product Identification
Product ID:D-2510 BLACK DEVELOPER
MSDS Date:03/13/1991
FSC:6850
NIIN:00F036076
MSDS Number: BTVDZ
Responsible Party
KAWASAKI-SHI
US
Emergency Phone: 044-548-5600
Info Phone: 044-548-5600
Preparer: HIDEO KIKUNO
Cage: TOSHI
Contractor
Telephone: 044-548-5600
Cage: TOSHI
Ingredients
STYRENE ACRYLIC COPOLYMER *94-2*
CAS: 25036-16-2
Fraction By Weight: 5.5%
COLUMBIA CARBON, CARBON BLACK, LAMPBLACK, BLACK PEARLS
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 0.5%
OSHA PEL 3.5 MG/CUM
ACGIH TLV: 3.5 MG/CUM
HEMATITE; IRON ORE; RED IRON ORE; BLOOD STONE; FERRITE
CAS: 1317-60-8
RTECS: MH7600000
Fraction By Weight: <94%
ZINC OXIDE
CAS: 1314-13-2
RTECS: ZH4810000
Fraction By Weight: <94%
OSHA PEL 5 MG/CUM
ACGIH TLV: 5 MG/CUM FUME
MAGNESIUM OXIDE, MAGNESIA
CAS: 1309-48-4
RTECS: OM3850000
Fraction By Weight: <94%
OSHA PEL 15 MG/CUM
ACGIH TLV: 10 MG/CUM
COPPER OXIDE, FERRITE POWDER
CAS: 1317-38-0
RTECS: GL7900000
Fraction By Weight: <94%
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MINIMUM IRRITATION TO RESPIRATORY
TRACT MAY OCCUR AS W/EXPOSURE TO ANY NON-TOXIC DUST. AMES TEST IS
NEGATIVE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:MINIMUM IRRITATION TO RESPIRATORY TRACT MAY
OCCUR AS W/EXPOSURE TO ANY NON-TOXIC DUST.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: IMMEDIATELY FLUSH
W/WATER FOR 5 MINS. INGESTION: RINSE MOUTH W/WATER. OBTAIN MEDICAL
ATTENTION IN ALL CASES.
Fire Fighting
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER
Unusual Fire/Explosion Hazard:THIS MATERIAL HAS NO UNUSUAL
FIRE/EXPLOSION HAZARDS. THIS MATERIAL WILL BURN IN CASE OF FIRE.
Accidental Release
Spill Release Procedures:SWEEP/CLEAN UP W/VACUUM CLEANER.
Handling
Handling and Storage Precautions:NO SPECIAL STORAGE REQUIREMENTS FOR
SAFETY REASONS.
Other Precautions:INHALATION SHOULD BE AVOIDED.
Exposure Controls
Respiratory Protection:NONE REQUIRED UNDER NORMAL USE
Ventilation:NONE
Protective Gloves:NONE REQUIRED UNDER NORMAL USE
Eye Protection:NONE REQUIRED UNDER NORMAL USE
Other Protective Equipment:NONE REQUIRED UNDER NORMAL USE
Supplemental Safety and Health
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:302F
Spec Gravity:5.6-6.8
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINE BLACK POWDER W/PRACTICALLY NO ODOR
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CO, CO2, NITROGEN OXIDES
Disposal
Waste Disposal Methods:WASTE MATERIAL MAY BE DUMPED/INCINERATED
IAW/FEDERAL, STATE & LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.